Who does Coffee Wood Marble sell to?

We supply importers, stone distributors, fabricators, quarries and project developers who buy Coffee Wood Marble in slabs, tiles or cut-to-size pieces. We work on the China side: the stone is bought from the mine, processed in Shuitou or Yunfu, inspected before loading and shipped FOB.

What is the minimum order quantity?

One mixed container for a first order. There is no per-piece minimum, and slab quantities can be split across a book-matched pair or an offcut depending on the job.

What thickness and finish are available?

Slabs are typically 18 mm and 20 mm, with 15 mm and 30 mm available. Common finishes are honed, polished, flamed, brushed, sandblasted and leathered. Tiles are produced in standard and large formats.

How long does production take?

Seven to fifteen working days after the deposit, depending on the form and finish. Cutting, edge profiling and surface treatment are the steps that set the pace, not the stone itself.

Which ports do you ship from?

Xiamen, Quanzhou, Ningbo and Shanghai. We quote FOB to the port you nominate and compare forwarders before booking.

Do you publish a price list?

No. Natural stone moves with the block, the grade, the finish and the market, so a number printed on a website is out of date by the time it is read. Send us the form, thickness, finish, size and quantity and we quote FOB in writing against that specification.

Can we get a sample before ordering?

Yes. We cut a sample from the same block as your order - an A4 hand sample, a book-matched pair or an offcut - and ship it by courier. There is no obligation to order afterwards.

wall-panel-and-feature · Coffee Wood Marble

Moulding, Cornice and Skirting

The profiled section that finishes a wall — skirting, cornice, architrave

Cut and finished from Coffee Wood Marble at our own processing base. Typical specification: A moulding is a section, and the section is what a template is cut from. The profile is chosen first — the ogee and the cyma are different templates, not different thicknesses — and the length is cut to the wall run rather than to a catalogue length, so the joint lands where the run changes. The stone is 18 mm or 20 mm for a skirting, and 30 mm for a cornice that projects.

Post Your Needs

Typical sizes & thickness

A moulding is a section, and the section is what a template is cut from. The profile is chosen first — the ogee and the cyma are different templates, not different thicknesses — and the length is cut to the wall run rather than to a catalogue length, so the joint lands where the run changes. The stone is 18 mm or 20 mm for a skirting, and 30 mm for a cornice that projects.

Available finishes

PolishedHonedBrushedLeathered

Common end uses

Cladding and Panelling Commercial Interiors Decorative Residential Wall Cladding

Moulding, Cornice and Skirting, explained

On this stone Made to order, and the block decides. Ask before you specify it.

The decision you are making

What it looks like

A narrow band of the stone with the grain running along it, which is why the figure has to be chosen rather than accepted: a moulding takes a thin slice across the bed, and the slice decides what it looks like.

Where it is the right answer

Finishing a clad wall, a stair, a shopfront, and anywhere a wall meets the floor or the ceiling and the joint needs to be covered.

On Coffee Wood Marble

A moulding takes the thinnest cut of any form on this site, and the pattern of the bed runs across the section — so the colour of a moulding is the colour of a narrow band, and a buyer who wants the dark vein to read should ask for the piece to be selected for it.

Not the same form

The flat inlay strip that goes into a floor is a border, not a moulding: it is the same trade word for a different cut. The border is on its own page.

Also searched as

moulding · skirting · cornice · architrave · stone trim · picture rail · baseboard

The specifications on these pages are the published supplier and trade-platform figures for Guizhou Coffee Wood Marble, and the decisions each form carries are our own reading of how this material behaves in that job. We have not run a slip test, an abrasion test or a weathering test on any of them. A floor, a path or an external threshold specified for slip resistance needs the tested wet-DCOF figure for the stone and the finish, which we will supply on request.

Products in this form

The stone, in photographs

Where each photograph was taken is written under it — the quarry yard, the sawing line, the polishing line, the packing bay, or a floor and a wall already laid with this stone.