Who does Coffee Wood Marble sell to?

We supply importers, stone distributors, fabricators, quarries and project developers who buy Coffee Wood Marble in slabs, tiles or cut-to-size pieces. We work on the China side: the stone is bought from the mine, processed in Shuitou or Yunfu, inspected before loading and shipped FOB.

What is the minimum order quantity?

One mixed container for a first order. There is no per-piece minimum, and slab quantities can be split across a book-matched pair or an offcut depending on the job.

What thickness and finish are available?

Slabs are typically 18 mm and 20 mm, with 15 mm and 30 mm available. Common finishes are honed, polished, flamed, brushed, sandblasted and leathered. Tiles are produced in standard and large formats.

How long does production take?

Seven to fifteen working days after the deposit, depending on the form and finish. Cutting, edge profiling and surface treatment are the steps that set the pace, not the stone itself.

Which ports do you ship from?

Xiamen, Quanzhou, Ningbo and Shanghai. We quote FOB to the port you nominate and compare forwarders before booking.

Do you publish a price list?

No. Natural stone moves with the block, the grade, the finish and the market, so a number printed on a website is out of date by the time it is read. Send us the form, thickness, finish, size and quantity and we quote FOB in writing against that specification.

Can we get a sample before ordering?

Yes. We cut a sample from the same block as your order - an A4 hand sample, a book-matched pair or an offcut - and ship it by courier. There is no obligation to order afterwards.

Answers / Methods

How long does it take to get Coffee Wood Marble delivered?

It depends on what is being made and where it is going. Stock slabs move fastest. Cut-to-size adds the cutting and polishing, and a project adds the approval time on the drawings, which is usually the longest part of it and is not ours to shorten.

A row of roughly six squared stone blocks standing in the sand at the foot of a quarry, each one cut flat and marked with a red number on its face. Behind them the quarry is cut into benches up the hillside, and wind turbines stand on the ridge above under a blue sky. — The cutting floor at the quarry, with the sawn blocks standing in the sand.

A quarry face with the beds marked up by hand in coloured paint. Reading from the top the marks say: 1 white vein, 2 elegant black, 3 grey wood grain, 4 coffee, 5 elegant black, 6 elegant black, 7 black and white, with the red outline around the overburden at the top of the face. Coffee Wood Marble is the fourth bed down. — The face of the quarry with the beds marked in the field.

Marble slabs standing upright on wooden frames inside the open back of a shipping container, strapped and ready to load — Slabs loaded for shipment.

Reference photographs. They show the material and the finish; they are not photographs of goods we made, and the colour on screen is not a colour-match.

The figures, and where each one comes from

Order	What has to happen first	What we can say
Stock slabs	Block selection	About two weeks to a month
Cut-to-size	Drawing approval, then cutting and polishing	Three to four weeks
A project	Shop drawings, samples, book-match selection	All of the above and the shipping

Why it behaves the way it does

The stone is not the slow part. What is slow is agreeing the figure, and a project that wants the panels to match has to be in that conversation before anything is cut.

What these figures are, and what they are not

We give a date against a specification, a quantity and a destination. We do not publish a lead time because the three numbers change it.

Measured data sheets and test reports

If you are specifying this

We have not published products against this question yet. Send us the process, thickness and quantity and we will quote it against what we can actually form, rather than against a catalogue.

Send a specification Ask for a sample

The figures

Order	What has to happen first	What we can say
Stock slabs	Block selection	About two weeks to a month
Cut-to-size	Drawing approval, then cutting and polishing	Three to four weeks
A project	Shop drawings, samples, book-match selection	All of the above and the shipping

Why

The stone is not the slow part. What is slow is agreeing the figure, and a project that wants the panels to match has to be in that conversation before anything is cut.

What these figures are, and what they are not

We give a date against a specification, a quantity and a destination. We do not publish a lead time because the three numbers change it.

The figures, and where each one comes from

Why it behaves the way it does

What these figures are, and what they are not

If you are specifying this

The figures

Why

What these figures are, and what they are not

Where this applies on this site